Warm grey
Fashion Grey Porcelain Paver
24" x 24"0.8" (20mm)
A refined grey surface for exterior kitchens, terraces, and interior-to-exterior transitions. Request a live stock check and physical sample before final quantities are approved.
Material character
Designed to feel considered, not merely specified.
Clean white stone look for bright pool decks, courtyards, and modern outdoor rooms. Contact us today for trade pricing and free samples.
- Reviewed for coordinated use across the Aura Stone material palette.
- Installed imagery and close-up product views support more confident selection.
- Samples and live availability checks are available before final commitment.
Verified product information
Size & thickness.
Product familyPorcelain Pavers
CollectionElite
Available size24" x 24"
Thickness0.8" (20mm)
Coordinated tile12" x 24", 24" x 24" · 0.35" (9mm) · Contact Aura for sourcing
20 mm porcelain paver performance data
Technical information.
General ANSI A137.3 performance information for early planning of exterior porcelain paver applications. The exact product, finish, caliber, production lot, installation assembly, and site conditions control final suitability.
Diamond White
- Published format
- 24" x 24" · 0.8" (20mm)
- General wet-use classification
- EW — Exterior, Wet; R11 and A+B+C are reported for the general 20 mm paver reference.
- Structural reference
- 2,000 lbf breaking strength and 5,000 psi modulus of rupture are reported under ASTM C1050.
- Documentation
- Request current product-specific technical reports when required by the designer, architect, engineer, code official, or project specification.
| Physical property | Test standard | North American reference | Reported result |
|---|---|---|---|
| Water absorption | ASTM C373 | ≤ 0.5% | Complies with ANSI A137.3 |
| DCOF — dynamic coefficient of friction | ANSI A326.3 | As reported | EW — Exterior, Wet |
| Barefoot skid resistance | EN 16165 (former DIN 51097) | — | A+B+C |
| Ramp skid resistance | EN 16165 (former DIN 51130) | — | R11 |
| Freeze / thaw cycling resistance | ASTM C1026 | As reported | Resistant |
| Thermal shock resistance | ASTM C484 | As reported | Resistant |
| Warpage — edge | ASTM C485 | ± 0.4% or ± 0.05 in | Complies with ANSI A137.3 |
| Warpage — diagonal | ASTM C485 | ± 0.4% or ± 0.07 in | Complies with ANSI A137.3 |
| Wedging | ASTM C502 | ± 0.25% or ± 0.03 in | Complies with ANSI A137.3 |
| Chemical resistance | ASTM C650 | As reported | Unaffected |
| Stain resistance | ASTM C1378 | As reported | Unaffected |
| Thickness variation | ASTM C499 | Range: 0.04 in | Complies with ANSI A137.3 |
| Breaking strength | ASTM C1050 | 2,000 lbf | Complies with ANSI A137.3 |
| Modulus of rupture | ASTM C1050 | 5,000 psi | Complies with ANSI A137.3 |
How to use this data: this is a general manufacturer performance reference for 20 mm porcelain pavers, primarily reflecting average production and matte/exterior-finish testing. It is not a product-specific certificate or a universal approval for every collection, finish, caliber, lot, installation system, or site condition.
- No surface is slip-proof. Water, contaminants, slope, footwear, joints, maintenance, and site conditions affect real-world traction.
- Use pavers from the same caliber and production lot where possible, especially across connected visible areas.
- Product-specific test reports and current technical documents may be requested when a project requires documented values.
- Dry-laid, pedestal-supported, rooftop, balcony, terrace, and other above-ground systems require project-specific review of support layout, reinforcement, wind, loads, drainage, perimeter restraint, and applicable codes.
- Any cracked or damaged paver in an elevated installation should be isolated and replaced promptly.
- Diamond White is listed by Aura as a 20 mm porcelain paver; confirm the exact finish, lot, installation method, and current technical documentation before final specification.
Installation & care
Protect the design through good planning.
Confirm base preparation, slope, drainage, joint layout, finish suitability, and perimeter details with the installer before ordering. Use only compatible cleaners and follow the current product, grout, and cleaner instructions; do not use hydrofluoric acid, sealers, waxes, or unapproved coatings.
Read the Product Use, Installation, Care & Safety Guide20mm planning library
Choose the surface and the system together.
Use these guides to evaluate benefits, coordinated tile formats, and elevated-system requirements before final quantities or installation details are approved.
Related Porcelain Pavers
Back to Porcelain Pavers Compare nearby options.
Soft white
Freedom White Porcelain Paver
24" x 24"0.8" (20mm)
Soft white porcelain paver direction for resort-style patios and poolside spaces. Selected for high-end Texas architectural projects; confirm current availability.
Cream buff
Indiana Buff Select Porcelain Paver
12" x 12", 12" x 24", 24" x 24", 12" x 48", 24" x 48", 24" x 48" MIX0.8" (20mm)
A warm buff limestone-inspired look for relaxed custom home outdoor living. Available through Aura Stone trade and contractor programs; confirm current quantity.